Oce Arizona 200 GT User Manual page 66

Settings Module
Network Connection Settings
Note:
Typically, DHCP is used to automatically obtain network settings. If "Use DHCP" is
selected, the only thing you might want to change is the network name of the printer.
The settings are displayed to troubleshoot possible network connection problems. One
situation that would require changes is if your network does not use DHCP to automat-
ically obtain network settings. In this case network settings have to be entered manually.
If you don't know how to do this, bring in a network consultant to determine what the
setting must be for the network (alternately, you can purchase a DHCP router for your
network that will automatically supply the network settings).
Network Name
Printer Description
Network Adapter Name
MAC Address
Network Status
Use DHCP
IP Address
Subnet Mask
Default Gateway
Note:
A network name for the printer cannot consist of numeric characters only - it must be
a mix of alpha-numeric characters.
If the Printer name is changed, the printer must be restarted for the change to take effect.
User Interface Settings
#
[42] User Interface
66 Chapter 4 - How to Navigate the User Interface