Smart Esolutions Information - Xerox WorkCentre 5735 System Administrator Manual

Administrator Tools Password
Meter Assistant provides detailed information including total counts of impressions, collection
times and dates. The meter data is recorded in the Xerox meter readings system and is used for
the invoicing of equipment on metered service agreements. The automatic collection of the meter
readings will ensure quality and reliability of the data used to manage your service agreements.
• Supplies Assistant™ - manages ink supplies for network connected equipment, and also monitors
actual usage.
Eligible devices will automatically be enabled for Supplies Assistant when the device is registered
with Xerox. Supplies Assistant manages supply orders to ensure the right supplies are provided at
the right time.
• Maintenance Assistant™ - submits device performance information for network connected
equipment to assist in remotely determining corrective actions required to resolve equipment
performance issues.
There are three ways to register the device for SMart eSolutions:
• Device Direct registration - this is available as a standard feature on the device and is accessible
via the Web UI using CentreWare internet Services (CWIS).
• SMart eSolutions Windows Client - this is an optional feature and the Windows Client can be
downloaded by visiting: www.xerox.com/smartesolutions.
• CentreWare Web (CWW) - this is a device management software application that manages,
configures, installs and provides reports for network connected devices. For further information,
see www.xerox.com/centrewareweb.
Note: SMart eSolutions is not available in all countries. Contact your Xerox Representative for
further information.
Information Checklist
Before registering the device for Smart eSolutions, ensure the following items are available or tasks
have been performed:
• Ensure the device is fully functioning on the customer's network.
• If the device direct method is to be enabled, TCP/IP and HTTP protocols must be enabled on the
device and setup so that internet access is provided to the device.
• If the Smart eSolutions client or CWW is to be used to enable Smart eSolutions, enable SNMP on
the device. Visit www.xerox.com/smartesolutions
software.

SMart eSolutions Information

Note: The following instructions will provide the steps required to enable Smart eSolutions via the
Device Direct method. To configure this feature access the Properties tab as a System
Administrator.
For further details, refer to
1. From the Properties tab, click on the [General Setup] link.
Select [SMart eSolutions] in the directory tree.
2.
3. In the Enrollment area, for SMart eSolution Enrollment ensure [Enrolled] is selected.
42 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Internet Services as System Administrator
for further instructions and to download the
on page 24.