Xerox WorkCentre 5735 System Administrator Manual page 84

Windows using Microsoft (R) Networking
7. Double-click on the name of the [WorkGroup] for the device as shown on the Configuration
Report.
8. Double-click on the name of the [SMB Host Name] for the printer as shown on the Configuration
Report.
9. Select the [Printer Share Name] of the printer as shown on the Configuration Report.
10. Click on [OK].
11. Click on [Next].
12. You will be prompted for a Print Driver. Select [Have Disk] and browse to the location of your Print
Drivers. Select the relevant Print Driver then click on [OK].
13. Select the printer then click on [Next].
14. Enter the printer name or keep the default, to select as the Default Printer click on [Yes].
15. Click on [Yes] to print a Test Page. Verify that it prints at the machine.
16. Click on [Finish].
Configure the Print Driver
If your device has any installable options fitted then these should be set in the driver, for example, a
High Capacity Feeder or a Finisher.
At your Desktop
1. Select [Start], ([Settings] (Windows 2000)) and then [Printers]/[Printers and Faxes].
2. Right-click on the appropriate printer icon and select [Properties].
3. Click on the [Configuration] tab.
4. Click on [Installable Options].
5. Select the options that are installed on the device.
6. Click on [OK].
Click on the [General] tab.
7.
8. Click on [Print Test Page].
9. Click on [OK] to close the Properties box.
10. Right-click on the printer icon within the Printers folder and select [Printing Preferences].
11. For Default Settings, select any required default settings in the Print Driver.
Verify the Test Page printed at the machine.
Configuration Cloning
If you are installing multiple machines on your network you may find the Cloning feature useful. This
feature allows you to copy configuration settings from one machine to another. For further information
enter the word cloning in the search tool.
84 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide