Xerox WorkCentre 5735 System Administrator Manual page 182

Hide thumbs Also See for WorkCentre 5735:
Table of Contents

Advertisement

User Data Encryption
4.
To create a Certificate Signing Request:
a.
Select the CA-Signed Device Certificate(s) tab.
b.
Click the [Create Certificate Signing Request (CSR)] button.
c.
Complete the Certificate Signing Request (CSR) form with details for:
2 Letter Country Code
State/Province Name
Locality Name
Organization Name
Organization Unit
Subject Alternative Name (if required)
E-mail Address
Common Name on the form is generated by the device and cannot be changed.
Note:
d.
Click on the [Finish] button to continue. Values from the form will be used to generate a
Certificate Signing Request.
e.
When the process is complete, you will be prompted to save the Certificate Signing Request.
Right-click on the [Right-click to save this certificate for submission to a trusted certificate
authority] link and select [Save Target As].
f.
Save the Certificate to your hard drive and send it to a Trusted Certificate Authority.
g.
Select [Logout] in the upper right corner of your screen if you are still logged in as
Administrator, and click on the [Logout] button.
To Upload a Signed Certificate
When a signed certificate is received from the Trusted Certificate Authority, upload the certificate to
the device.
Note:
To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1.
From the Properties tab, click on the [Security] link.
2.
Select [Security Certificates] in the directory tree.
3.
Select the CA-Signed Device Certificate(s) tab.
Click the [Install CA-signed Device Certificate] button.
4.
5.
Click the [Browse] button to locate the signed certificate. Click on the [Open] button.
6.
Click on the [Next] button. The details of the Certificate are displayed. Change the friendly name
of the Certificate if required and click [Next].
7.
The digital certificate will appear in the installed certificates list.
Note:
For the upload to be successful, the signed certificate must match the CSR created by the
device and must be in a format that the device supports.
Note:
The device only supports certificates of type "Base64".
8.
To view installed certificates:
a.
Select [Security Certificates] in the directory tree for [Security].
b.
Click on the checkbox for the required certificate in the list.
182
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Internet Services as System Administrator
on page 24.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents