Xerox WorkCentre 5735 System Administrator Manual page 80

Windows using Microsoft (R) Networking
8. Touch [TCP/IP-Line Printer], in the TCP/IP - Line Printer screen,
a. Touch [Enable], to enable the option.
b. If you wish to change the LPR port for your device, touch the port number area and enter the
desired port number using the numerical keypad.
Note: While you can change the port number at which your machine will accept LPR print jobs it is
recommended that you do this ONLY with extreme caution as most LPR spoolers are set to send
print jobs to the default port.
9. Touch [Save], then touch [Close].
10. Touch [Microsoft Networks], the Microsoft (R) Networks screen displays.
a. Touch [Microsoft Enablement].
b. Touch [Enable] to enable the Microsoft Network protocols.
c. For Transport, select [IP/Ethernet]. Touch [Save] to return to the Microsoft (R) Network
screen.
11. Touch [Workgroup and Host], in the Workgroup and Host screen:
a. For Workgroup Name, touch detail bar.
b. Touch [Clear Text] to clear the default name, enter Name using the on-screen keyboard. To
access more characters, touch [123] on the user interface.
c. Touch [Save], to return to the Workgroup and Host screen and repeat for SMB Host Name.
d. Touch [Save] to return to the Microsoft (R) Networks screen.
12. Touch [Printer Description]. In the Printer Description screen:
a. For Printer Name, touch detail bar.
b. Touch [Clear Text] to clear the default name, enter description using the on-screen keyboard.
To access more characters, touch [123] on the user interface.
c. Touch [Save], to return to the Printer Description screen and repeat for Printer Description.
Touch [Save] to return to the Microsoft (R) Networks screen.
d.
13. Touch [Connections], in the Connections screen:
a. For Maximum Connections, touch the detail box, enter the desired maximum simultaneous
connections using the numerical keypad.
b. For Connection Timeout, touch the detail box, enter the desired number of seconds for
timeout using the numerical keypad.
c. Touch [Save] to return to the Microsoft (R) Networks screen.
14. Press the <Log In/Out> button, touch [Logout] to exit the Tools pathway.
Wait for the device to reboot.
15. Press the <Machine Status> button.
a. Touch [Machine Information] tab.
b. Touch [Print Reports].
c. Touch [Print Report].
The Configuration Report will print. On the report verify the details under Network Setup
heading are correct.
d. Touch [Close].
16. Install Print Drivers on your network or client workstation using the instructions on the following
pages.
80 WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide