Netware - Xerox WorkCentre 5735 System Administrator Manual

NetWare

NetWare is a network operating systems developed by Novell that supports DOS, Windows, OS/2 and
Mac. NetWare is the most widely-used LAN control program. It is a stand-alone operating system that
runs in the server.
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• An existing operational NetWare network.
• Login to a NetWare file server/tree as Supervisor/Administrator or have the equivalent privileges.
• Ensure the device is connected to the network via Ethernet cable.
• Set up a print server object using NWADMIN. Refer to the documentation supplied by Novell to
complete this task. Record precisely (observe upper and lower case, dot notation) the NDS Tree,
NDS Context Name, frame type, Print Server Name and the Print Server password assigned. If your
printer services queues on multiple file servers, the Print Server name and password must be the
same on all file servers.
Configure NetWare Settings
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Connectivity] link.
2. Click on the [Protocols] link.
3. Select [NetWare] in the directory tree.
4. In the General area:
a. For Protocol, check the [Enabled] checkbox to enable NetWare protocol.
b. If FIPS 140-2 encryption is enabled on the device a widow is displayed requesting that you
acknowledge that Netware is not FIPS compliant. Click the [Confirm] button to continue.
c. Select the required [Filing Transport] from the drop-down menu.
d. Select the required [Frame Type] from the drop-down menu. Selections for the frame type
are dependent upon the Physical Connection.
e. For [Queue Poll Interval], enter the queue poll interval in seconds. The range is from 1 - 240
seconds, and the default is 5.
f. Physical Connection displays physical network connection. This will display "Ethernet".
g. External IPX Number displays the current IPX number.
h. Enter the NetWare logical name associated with the device in the [Printer Server Name]
field. The default name is based on the Ethernet MAC address.
i. Enter the print server password in the [New Print Server Password] field, then re-enter it in
the [Retype New Print Server Password] field.
j. Check the [Select to save new password] checkbox.
Access Internet Services as System Administrator
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Network Configuration
on page 24.
System Administrator Guide
127