Xerox WorkCentre 5735 System Administrator Manual page 323

Check that the device you want to clone settings to supports XSA
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [General Setup] link.
2. Select [Cloning] in the directory tree.
3. From the display of available check boxes, verify that Accounting is among them.
4. Then select [Configuration] in the directory tree, and verify that both devices have the same
System Software Version.
The System Software Version is located in the Printer Setup area.
To make a Back-up file
1. From the Properties tab, select [Cloning] in the directory tree.
2. From the display of available groups, select the settings that you wish to clone. To clone all
features, click on the [Clone] button, or to customize the configuration file disable any of the
features by clicking the checkboxes next to the feature(s) and then click on the [Clone] button.
3. Right-click on the [Cloning.dlm] link that appears and select [Save Target As].
4. A dialog box will prompt you to specify the name and location for the cloned file. Ensure the
extension reads .dlm.
5. Click on the [Save] button. The .dlm file can now be used to restore the information to the same
device or to clone other devices.
To Restore Settings or Clone Settings to Another Device
Note: This procedure will cause the device to reboot and be unavailable over the network for
several minutes.
1. From the Properties tab, select [Cloning] in the directory tree.
2. In the [Install Clone File] area, click on the [Browse] button.
3. Locate the [Cloning.dlm] clone file and click on [Open].
4. Click on the [Install] button.
The device will be unavailable over the network for several minutes. When rebooted a
Configuration Report will print, if enabled.
5. The XSA settings and data will be restored as they were when the back-up file was created. If you
are cloning another device you may want to change, delete or reset the XSA accounts as
appropriate for the new device.
Access Internet Services as System Administrator
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
on page 24.
System Administrator Guide
323