Station Application Programming Table - STARPLUS DHS-L Technical Manual

Programming
S T A T I O N APPLICATION
1.
UCD PROGRAMMING
UCD Group
Tenant
UCD Attrib
2.
UCD GROUP MEMBER
Member
Hunt Method
No Ans Time
Over 1 Timer
Over 1 Dest
Over 2 Timer
Over 2 Dest
Over Counter
Reroute Dest
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-6: Station Application Programming Table
Range
1-24
1-6
UCD/VA
Any valid station
number
Line/Dist/All
5-60
0-255
0-255
1-128
Default
24 UCD groups are allowed in the system.
1 The tenant group to which the UCD group is
assigned.
UCD This defines the hunt group type.
Each UCD group may has 24 members in it.
Line There are 3 hunting methods allowed: Linear
(LINE) Distributed DIST) All Ring (ALL).
10 This option defines the length of time a call
will ring a member of the group before
advancing to the next member.
0 This timer determines the length of time that
a call will ring in the UCD groupbefore being
transferred to the overflow 1 destination If
the timer is set to 0 then it will not overflow
to the overflow 1 destination.
Null Thisistheoverflow1destination and canbeany
valid station number or another UCD group.
0 This is the same as the over 1 timer except it
overflows to the over 2 destination.
Null Same as over 1 destination.
1 This option defines how many timesa
unanswered c all cycles to the overflow 2
destination before going to the reroute
destination.
Null This option defines the final destination for
unanswered c alls to a group. This option is
used only when:
No overflow 2 destination is defined and
the call remained unanswered by
destination 1.
The call remained unanswered by the
overflow 2 destination after the overflow
count has expired.
The reroute can be any extension or another
UCD group.
Description
3-21