Table of Contents
Advertisement
Attend ant
E
XE CU TIVE
To turn ON a signaling alarm:
1. Press [FEAT ].
2. Dial [9] + [2].
3. Press CHG.
4. Dial HHMM where HH is hour, MM is minute (24-hour clock).
5. Press [SAVE].
6. Press soft button 1 for one time activation, or soft button 2 for always.
To turn OFF a signaling alarm:
When the alarm time is reached, you will hear tone ringing and the display will show:
Press [ack].
To cancel the alarm clock feature prior to alarm activation:
1. Press [FEAT ].
2. Dial [
Conditions
The alarm clock will be canceled automatically after the alarm time is reached.
The Executive Telephone display will be unchanged until [ack] is pressed or when the
telephone is used for another call.
Attendant
Description
One primary attendant is provided in the system for support of necessary services like
Line Recall, Forced Incoming Intercom Call Forward and Manual Night Service operation.
A second, or alternate, attendant position may be established. Each tenant group can
have its own secondary attendant.
The attendant may establish a private personal password for control of the system
service mode (Day/Night/Time), Time Of Day settings and System Speed Dial number
programming. One valid station number must be assigned to serve as the attendant.
Programming
One station may be assigned the attendant station. This station will receive all recall
indications and calls not properly routed.
T
--
ELE PHONES
ALA RM
ac k
] + [9] + [2].
✳
Station 201 is the defaultAttendant Position and is assigned CO line ringing for all CO lines.
Chapt er 3 - Key Station Features, Opera tion, and Programming
R EACH ED
3-45
Advertisement
Table of Contents
