Button; Dialing Ratio - STARPLUS DHS-L Technical Manual

Voic e Mail
q. Press [next] until LN RECALL appears, then press [chg].
r.
s.
t.
u. Press [next] until RECORD DGT appears, then press [chg].
v. Press [FEAT + 4] and dial [7], then press [save].
w. Press [next] until ICM SUFFIX appears, then press [chg].
x. Dial
y. Press [next] until DIS DGT appears, then press [chg].
z.
Press [clr] ... this completes the Voicemail Integration process.

Button

Voice Mail button is used to retrieve voice mail messages, and will flash an LED indicator
when there are messages.
Operation
E
XE CU TIVE
1. Press [FEAT ] + [#] + [3].
2. Press programmable button you wish to program for the message waiting indicator.
3. Press [chg]. The following options display: DIR and FEAT.
4. Select [FEAT].
5. Press [FEAT ] + [6] + [4].
6. Press [save].
E
NHANCE D
1. Press [FEAT ] + [#] + [3].
2. Press programmable button you wish to program for the message waiting indicator.
3. Press [2].
4. Press [FEAT ] + [6] + [4].
5. Press [HOLD].

Dialing Ratio

There are two VM Dialing Ratio parameters that may be programmed; TONE TIME and
INT_DGT TIME.
Default
The DHS-L
from 60 - 150 msec.
Press [FEAT + 4] and dial [7], then press [save].
Press [next] until UCD OVERFLOW appears, then press [chg].
Press [FEAT + 4] and dial [7], then press [save].
, then press [save].
✳
Enter #99999, then press [save].
T --
ELE PHONES
T --
EL EPHONE S
TONE TIME and INT_DGT TIME are set at 120 msec, and the adjustable range is
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-141