Table of Contents
Advertisement
3-56
Chapter 3 - Key Station Features, Operation, and Programming
External Call Forward
Description
The External Call Forward (ECF) feature allows a station with a ringing assignment to
forward all calls to an off-site location.
Programming
1. Press [FEAT ] + [2].
2. Press [next].
3. Press [ext].
4. Dial the number to be forwarded to.
5. Press [save].
ECF programming has two data fields:
SERVICE - Allows feature to operate only during certain system modes of operation.
TALK TIME - The preset time limit of the ECF call. ECF may be discontinued prior to the
expiration of the TALK TIME by the remote party by dialing [0] + [#] at any time during
the ECF call, or [0] + [
Default
The
DHS-L
SERVICE = Always
TALK TIME = 5
Programmable Range - ECF Data Fields
CALL HANDLING (refer to item 35,
SERVICE = never/day/night/always
TALK TIME = 1/2/3/5/10/15 minutes.
STATION (refer to item 16,
Default = No (Station is not allowed to External Call Forward)
Cancel
1. Any call forward mode can be canceled at the station that is forwarded by pressing
[FEAT ] + [2]. The display will indicate DELETE FORWARD. Let's assume that you are
Station 10 and Station 12 is Busy Call Forwarded to Station 16.
2. Call Station 12, which is busy on another intercom call.
3. Your call is forwarded to Station 16 and you hear ringback tone. At an Executive
Telephone, your display shows:
] to extend it.
✳
default settings of associated ECF data fields are:
"ECF OPERATION" on
CALL ING
cb ck
ms g
"EXTERNAL FWD" on page
page3-8):
STA
1 6
Call Forw ar d
3-12):
Advertisement
Table of Contents
