User Name Programming; Executive Key Telephone - STARPLUS DHS-L Technical Manual

User Name Pr ogramming
14. Press [next]. The display shows:

User Name Programming

Description
An alphanumeric, seven-character user name may be assigned to each station in the
system. This name will be displayed on Executive Key Telephones in place of the standard
STATION message. Station user names are entered in system programming. The names
may consist of upper and lower case letters.
The station user name or department can be programmed to appear on the LCD of an
Executive Key Telephone. The station intercom number will also be displayed when a
name has been programmed. The name may consist of upper and lower case letters, plus
numbers. DSS/BLF buttons may be conveniently labeled to associate stations by name,
instead of station number.
Operation
To set up a station/user name:
1. Press [F] + [#] + [
2. Select [Resource] and press [show].
3. Press [next], then press [user name].
4. Enter desired station number, then press [show].
To enter a name using the dial pad, refer to
Conditions
When a User Name is programmed for stations, the STA normally displayed at that
idle station will be replaced with the programmed name.
Names may be 7 or fewer characters in length.
R ER OU TE D E ST
ba ck n ext
Call Forward—Busy No Answer may affect operation of this feature.
In Station Programming... group members ina Voice Mail Hunt Groupmust be setto Voice
Mail-type "Yes".
] to enter Database Programming.
✳
Chapt er 3 - Key Station Features, Opera tion, and Programming
: N UL L
c h g
Table 3-16: Dial Pad Key
3-135
Programming.