Pause - STARPLUS DHS-L Technical Manual

Pause

Operation
1. While a page is currently in progress, an Enhanced or Executive Telephone displays:
2. Press [FEAT ].
3. Dial [5] + [9].
Conditions
A page may be answered at any telephone using the Meet Me Page code, when the
page announcement is heard over the telephone speaker.
The page may be any zone page or all page.
Meet Me Page is functional regardless of group assignments.
Pause
Description
You can insert a pause to generate an intentional delay in dialing on outgoing CO line
calls. A pause or a combination of pauses may be stored in the Speed Dial bins to allow
timed access to special services, while allowing you to monitor the progress of the call. A
pause will appear as P on an Executive Telephone display. Last Number Redial will
remember any pauses dialed manually.
Operation
1. During dialing on any CO line or when programming a Speed Dial bin (refer to
Dialing
2. Dial [7] + [0].
Programming
Whenever the system Pause code is manually dialed while connected to a CO line or
when it is programmed into a speed dial bin, the system will pause dialing digits for the
length of time programmed here.
Default
The DHS-L
The Meet Me Page code may be programmed on any available feature button.
(ABBR)"), press [FEAT].
P
Pause may be storedon a programmable feature button and is also used in programming
fields that accepta Pause character.
Pause Time is set for 2.0 sec, and is variable from 1.5/2/3.5/5 sec.
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-115
"Speed