Table of Contents
Advertisement
Conferenc e
The conference initiator may force-release a conference member or talk privately with a
conference member.
E
NHANCE D
To force-release:
1. Press [FEAT ].
2. Dial [7] + [4].
3. Dial the station number or press the line button to release.
To talk privately (connects second party, places third party on hold):
1. Press [FEAT ].
2. Dial [5] + [7].
3. Dial the station number or press the line button to talk privately.
E
XE CU TIVE
To force release or talk privately:
1. Press [private] or [forced].
2. Dial the station number or press the line button to release or talk privately.
Conditions
The station who establishes a conference is called the controlling party, and only the
controlling party is allowed to invite or forcibly release any attending internal or
external party, or to setup a private talk with any one attending party.
When adding new parties to a conference and while speaking privately to a particular
conference member, other members of the conference will be connected to
Music-On-Hold.
Conference can only be established at a key telephone.
Each of the calls involved in a holding conference will be placed on Exclusive Hold.
Unsupervised
Description
This feature allows you (as the conference controller) to exit a conference, yet enable two
outside lines also engaged in the conference to continue their conversation. This
conference is called Unsupervised, since no internal user is involved as a member of the
conference. To establish an Unsupervised conference, you must first build a Supervised
conference.
T
--
EL EPHONE S
T
--
ELE PHONES
Any conference feature code may be programmed on any available programmable
feature button.
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-81
Advertisement
Table of Contents
