Table of Contents
Advertisement
Confi guratio ns
When in GUEST mode, the station is programmed as follows:
1. Press [FEAT ] + [9] + [2]. The display shows:
2. Press [chg]. The display shows:
3. Enter the desired time in HH/MM format and press [save]. The display shows:
4. Press [one]. The display returns to an idle mode and shows the current date and time.
(The always option is disabled when a telephone is in GUEST mode. This function can
only be programmed at the Attendant station.)
Room Status
Description
The Operator/Attendant can monitor the following GUEST room status conditions: Check
In, Check Out, Ready, Maintenance, Unavailable.
Programming
The room status lamp is indicated when a station is idle and DND is disabled. For this
feature to operate, HOTEL must be enabled. Only the Tenant Attendant can access this
function (except Maid Clean Code).
Operation
Check In
1. Press [FEAT ] + [7] + [#] + [2]. The display shows:
2. Enter the desired station number and press [save].
If the station directory number is valid, all the DSS/BLF of that station will become
green-lit, the COS of that station will follow the Station COS (Day/Night) in the
Database and the Room Status will be Check-in.
R E MIN DE R : N U LL
bk sp s ave
c h g
R E MIN DE R : __ : __
bk sp s ave
c h g
R E MIN DE R : 0 6: 30
o n e
alw ays
J AN 8 WED
: 12 : 12
S TA
D - 1 20 2
C HE CK IN
: _
bk sp s ave
c h g
Cha pter 5 - HOTEL/MOTEL -- Operator Fea ture s
5-7
Advertisement
Table of Contents
