Co Lines Programming Table - STARPLUS DHS-L Technical Manual

Programming
C O L I N E
1.
POSITION
2.
TENANT GROUP
3.
ROUTE
4.
DAY COS
5.
NIGHT COS
6.
DIALING
7.
LINE TYPE
8.
CALL ABANDON
9.
PRIVATE TO
10.
VM DIGITS
11.
ANSWER POSITION
Day 1
(Member 1-6)
Day 2
(Member 1-6)
Day 3
(Member 1-6)
Night
12.
CO Pre Dest
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-2: CO Lines Programming Table
Range Default
Non- None
Programmable
1-6
1-24
0-7
0-7
Tone/Pulse Tone
CO/PBX/Page/ CO
Empty
Y/N N
Any valid station Null
Any valid mailbox Null
Station 201 is the only ringing station by default.
6 positions may be programmed for each ringing option, and 1 position for
Night mode.
Any valid station 201
or hunt group
Any valid station 201
or hunt group
Any valid station 201
or hunt group
Any valid station 201
or hunt group
Any valid station Null
or hunt group
Description
Represents the system position for that
station number (1-XX-YY):
1 = module (1 only)
XX = card slot 4-12
YY= por t on card 01-08, 1-24 (T1).
1 There are 6 tenant groups in the system.
Each station may be assigned to one tenant
group.
1 Used to group trunks together. Each trunk
may be assigned to one trunk g roup.
0 Determines the line d ialing privileges in the
day mode of operation.
0 Determines the line d ialing privileges in the
night mode of operation.
Determines which line will use DTMF or Dial
Pulsing when dialing out.
To program what type of trunk is connected
to that circuit.
To program the trunk to drop the call after a
loss in loop current.
Specifies a station that a specific trunk will be
private to.
Six members are available for ringing
assignment.
Six members are available for ringing
assignment.
Six members are available for ringing
assignment.
Only one member is available for ringing
assignment.
3-9