System Application Programming Table - STARPLUS DHS-L Technical Manual

Programming
S Y S T E M APPLICATION
1.
RING SCHEME
2.
LETTER TYPE
3.
HOUR MODE
4.
POSITION TO DIR
Dir Number
5.
DIR TO POSITION
Position
6.
NUMBERING PLAN
Trunk Route
Length
Leading
Sta Dir Number
Length
Leading
Sta Page Group
Length
Leading
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-8: System Application Programming Table
Range
0-4
0-7
12/24
Example:
1-04-01=station 201
1-4
1-4 (1-9)
2-4
1-4 (1-9)
2-4
1-4 (1-9)
Default
2
0 Not applicable - do not change.
24 Select standard or military time.
This setting is used to change station/CO line
numbers per their physical location. Enter
position as Cabinet/Slot/Port. (Cabinet
number will always be number 1.)
Displays DIR number of port at specified
address.
Enter valid DIR number of a station/line.
Displays physical location of specified DIR
number.
The 24 trunk routes can be accessed using
the 5 different prog rammable directory
numbers.
1 The length of the directory number can be
from 1 to 4 digits.
9 Any digit 1-9 c an be used as the lead ing digit
as long as it does not conflict with existing
numbers.
Stations can be accessed using up to 9
different directory numbers.
3 The length of the directory number can be
from 2 to 4 digits.
2 and 3 Any digit 1-9 c an be used as the lead ing digit
as long as it does not conflict with existing
numbers.
The 24 Page groups are accessed using the
following director y numbers.
3 The length of the directory number can be
from 2 to 4 digits.
40, 41, 42 Any digit 1-9 c an be used as the lead ing digit
as long as it does not conflict with existing
numbers.
Description
3-25