Table of Contents
Advertisement
DHS- L Instal lation
6. Refer to the Station Numbering Plan listed in
2-Port Analog Expander
The 2-Port Analog Expander is a single PCB identical to the PCB of the 2-Port Analog
Adapter. One 2-Port Analog Expansion may be housed in the 2-Port Analog Adapter
enclosure. The expansion is shipped with screws used to secure it to the existing 2-Port
Analog Adapter PCB stand-offs. Since the PCB and circuit function are identical to the
2-Port Analog Adapter, follow the installation wiring instructions provided for the 2-Port
Analog Adapter (Refer to
1. Position the 2-Port Analog Expander over the stand-off posts that are factory
installed on the 2-Port Analog Adapter PCB.
2. Using the screws supplied with the 2-Port Analog Expander, secure the 2-Port Analog
Expander PCB to the stand-off posts (refer to
2 Port Analog Adapter
Figure 2-27: 2-Port Analog Adapter
2-Port Analog
Only one 2-Port Analog Expander can be installed in a 2-Port Analog Adapter housing.
Chapter 2 - Description a nd Installation
Table 2-12
.
2 Port Analog Expander
Adapter).
Figure 2-27
).
2-49
Advertisement
Table of Contents
