Table of Contents
Advertisement
Cal l Operator (C al l Attendant)
DND Forward
1. Lift handset.
2. Dial [#] + [2] + [7] + [xxx].
xxx = destination de sired
External Forward
1. Lift handset.
2. Dial [#] + [2] + [6].
Follow To
1. Lift handset.
2. Dial [#] + [2] + [5] + [xxx].
xxx = destination de sired
Follow Me Call Forward
1. Lift handset.
2. Dial [#] + [2] + [3] + [xxx] + [pppp].
xxx = destination de sired
pppp = current password
No Answer
1. Lift handset.
2. Dial [#] + [2] + [4] + [xxx] + [t].
xxx = destination de sired
t = time to ring before forwarding; 0 = 10 secs, 1= 20 secs, 2 = 30 secs, 3 =40 secs, and 4 =50 secs
Call Operator (Call Attendant)
Description
The system Attendant station may be easily called by one dialed digit code. At default,
this code is 0.
Operation
1. Lift handset.
2. Dial [0].
Conditions
The code dialed for the system attendant (0- 9) is dependent on Database
Programming of Operator Code. If 9 is programmed, that is the code that must be
used to call the system attendant.
The Operator access code (0 or 9) is mutually exclusive with the outside CO line
access code.
Chapter 4 - SLT Features and Operation
4-7
Advertisement
Table of Contents
