Table of Contents
Advertisement
Station Loc k/ Unl ock
Parameters
When the SHOW STATION prompt is displayed, the programmer should enter the
three-digit Station number on the dial pad. Once entered, the center Soft Button [show]
is pressed to enter into Station Programming Parameters for that station number.
Default
The
DHS-L
Position
Station numbering can be changed for any Station Port between the system allowable
range. If the current assigned station number is not desired or must be changed, the
programmer may select any of the available station directory numbers to reassign this
port.
Default
DHS-L
ports = 201-272 and 301-372
Time
Description
The system provides a built-in clock to track System Time for certain features such as
System Night Service Mode Change, SMDR Call Message Recording, Alarm Clock Check,
etc. This clock is battery protected from power failure by a battery provided inside the
KSU. System Time can be changed at any Executive Key Telephone using the attendant
password or system programming.
Station Lock/Unlock
Description
You may use this feature to prevent unauthorized outside calling from your telephone.
The feature code is also used to program your private 4-digit password number. Default
password = 0000.
Operation
E
NHANCE D
To lock the telephone:
1. Press [FEAT ].
2. Dial [9] + [7].
3. Dial your password.
station range is from 201-272 and 301-372.
Use of Station Lock [Feat 97] will restrict access to 911.
T
--
EL EPHONE S
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-125
Advertisement
Table of Contents
