Table of Contents
Advertisement
3-88
Chapter 3 - Key Station Features, Operation, and Programming
End-to-End Signaling
Description
This feature allows digital key telephone stations to generate in-band DTMF tones on ICM
calls to an on-site voice mail system. DTMF digits will only be sent to the SLT port when
connected to a 2-Port Analog Adapter/Expansion that is programmed as a VM PORT.
Feature Button
Copy
Feature Button Copy is provided to assist in programming multiple stations with the
same button programming. Once a station's feature buttons are programmed using the
station feature Programmable Feature Buttons [F#3] that station's button programming
may be copied to other system stations in this database programming function. Follow
the displayed instructions to copy one station's button data to another. Station Number
range is 201-272 and 301-372.
Inquiry
Description
You may review the programming for feature buttons at an idle Executive Telephone. To
review the programming, dial the Feature Button Programming mode.
Operation
1. Press [FEAT ].
2. Dial [#] + [3]. The display shows:
3. Press desired feature button to view its contents (code). In this example, button 20 is
pressed.
4. Press [show]. The name of the feature is displayed.
PR ES S FEATU R E K EY
F9 6__
s ho w c h g
MES SAG E
WAITIN G
End -to- End Si gnali ng
Advertisement
Table of Contents
