Table of Contents
Advertisement
DSS C onso le
DSS Console
Description
Four DSS consoles may be assigned to a station. Each DSS Console uses one digital
station port. Up to 12 DSS consoles may be installed on a system. The DSS console
buttons are programmed by the station user using the FEAT + # + 4 command, then
pressing the button on the DSS to be programmed. All system feature codes may be
stored on the Programmable Feature Buttons for one-button operation. Certain
programmed feature buttons will light when activated (DND, Call Forward, DSS/BLF, etc.),
while others such as Call Pick-Up, Background Music, Last Number Redial, do not.
Features are separated into three distinct categories for programming on a button: CO
Line, Station, or Feature.
Programming
To access the remote programming:
1. Press [FEAT ] + [#] + [
2. Press [next] until reaching Resource, then press [show].
3. Press [next] until reaching DSS Allocation, then press [show].
4. Press [show], then enter the DSS Unit number.
5. Press [show], then press [chg].
6. Enter the station number where you want the DSS to be assigned, then press [save].
7. Press [next], this will bring you to the DIR Number, then press [chg].
8. Enter the station number of where the DSS is attached, then press [save].
9. Press [hold], then press [clear] to exit remote programming.
Operation
E
XE CU TIVE
To program DSS console buttons:
1. Press [FEAT ].
2. Dial [#] + [4].
3. Press programmable feature button.
4. Press [chg].
5. Dial the desired directory number (201-272, 301-372, 700-795).
6. Press [save].
To erase the contents of a programmable feature button:
1. Press [FEAT ].
2. Dial [#] + [4].
3. Press programmable feature button.
4. Dial [0].
5. Press [HOLD].
] + password (########), then press [show].
✳
T
--
ELE PHONES
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-87
Advertisement
Table of Contents
