CO Line
3. Select [ICM], the display shows:
4. Select [line], the display shows:
5. Press [save], the display shows:
6. Select [route], the display shows:
To Cancel Automatic Selection:
E
XE CU TIVE
1. Press [FEAT ].
2. Dial [
E
NHANCE D
1. Press [FEAT ].
2. Dial [
Conditions
A Line Programmed for Automatic Line Selection must be programmed as available
for access in system programming.
When Automatic Line Selection is set to EMPTY, you will not hear a dial tone when
you lift the handset or press [SPKR]. However, you may still dial intercom numbers.
Call Discrimination
Description
The system provides 100 digit interval tables to apply call restrictions. Each table is
comprised of four data fields: From, To, DAY ALLOWED and NIGHT ALLOWED. The From
and To data fields allow the programmer to enter a range of allowed digits up to 10 digits
each in length. This flexibility allows the programmer to enter only the digits significant
to the dialing restriction desired.
SEL ECT ICM
D IR #
bksp
LIN E
dir n u m ber
D IR #
bksp
T
--
ELE PHONES
] + [9] + [5].
✳
T
--
EL EPHONE S
] + [9] + [5].
✳
Chapt er 3 - Key Station Features, Opera tion, and Programming
:
__ __
s ave
c h g
:
xxx
:
__ __
s ave
c h g
3-77