Call Answer/Select - STARPLUS DHS-L Technical Manual

Hold
Operation
1. While connected to any CO line:
2. Press [HOLD].
Conditions
The CO line must have loop supervision interrupt signal from the local carrier upon
disconnect by the outside party. All types of Hold like System Hold, Exclusive Hold
and Conference Hold are related to the Hold Call Abandon feature.
Certain Central Offices do not provide loop supervision.
If the outside held party disconnects, the system will automatically release the held
CO line.
At default, Call Abandon is enabled for all CO lines.

Call Answer/Select

Description
Call Answer allows a user to place and retrieve calls ON and OFF of hold by simply
pressing the HOLD button. When multiple calls are holding at the station, Call Answer will
access the CO line that has been holding for the longest period of time while placing the
current call on hold. Call Answer works for all CO lines regardless of the station CO line
button programming.
Operation
Press [HOLD]. A currently connected call will be placed on hold. If there was a
previously held call, this call is now connected.
Conditions
Call Answer will also operate for intercom calls placed on hold.
If the person on Hold hangs up, the system will automatically release the held CO line.
Line appearance is not required for station to put call on hold.
CO LI NE 1
If using CO lines for paging or external devices, assign devices to lowest available line.
Chapt er 3 - Key Station Features, Opera tion, and Programming
xx: xx
3-95