Dhs-L Technical Specification Tables; Digital Hybrid System Capacities - STARPLUS DHS-L Technical Manual

2-20
Chapter 2 - Description and Installation

DHS-L Technical Specification Tables

Component
System Programming Memory Protection
Ports:
CO/PBX/Centrex Lines
Digital Stations
Standard SLTs
24 Digital COs
DSS Consoles
DTMF Receivers:
LCOB 8
T1
DTMF
DTMF Senders
Tone Detectors (used to monitor call progress
tones: Busy, Ring-back tones, etc.):
LCOB 8
T1
DTMF Receiver Board
Contacts
Conference Circuits
DISA Circuits
System Attendants
Table 2-4: Digital Hybrid System Capacities
300 Hours on a fully-charged battery (internal Nimh
battery requires 14 continuous-powered hours of system
operation to become fully charged.)
96 (Note: 0 stations max. with this configuration.)
144 (Note: 0 copper lines max. with this configuration.)
144 (Note: 0 digital stations max. with this configuration.)
24 Digital T1 channels
12 maximum
2 (8 CO lines)
2 (24 channels)
8
Unlimited. (DTMF signal generation is derived from the
core system tone resource. Tone combinations are
available as needed.)
2 (Shared for advanced call processing system features;
DISA; ECF; ABR)
1 (Shared for advanced call processing system features;
DISA; ECF; ABR)
8 (Shared for advanced call processing system features;
DISA; ECF; ABR)
2 LBC contact is available via the MISB.
Four-party conference circuits (8 per system).
Any number of CO lines may be programmed for DISA
operation.
1 + 1 (6 tenants and 6 alternate tenants)
D HS-L Tec hni cal Spec ific ation Tabl es
Description