Table of Contents
Advertisement
Gener al C onventi ons
General Conventions
DHS-L
Features
System Access -- System resources are accessed using directory numbers to dial access
the resource (station numbering, Hunt Group numbering, etc.).
The [FEAT] button joined with dial key codes will appear throughout the text. This
button is used to access most system features.
Press the [CLEAR] button to cancel the current operation.
Programming Mode -- System programming can be executed at any idle Executive Key
Telephone. Only one station may enter the system programming mode at any time.
Valid programming is confirmed with a single beep tone from the speaker.
Invalid programming is alerted with a double beep tone.
One-Button Access -- Any feature or resource code may be stored for one-button access
under an available Programmable Feature Button.
LCD Prompts -- Operation steps are oriented for the Executive Key Telephone since the
interactive LCD prompts encompass all Executive Key Telephone functions.
Soft Button / Display -- Three LCD interactive Soft Buttons are positioned beneath the
display on the Executive Key Telephone. These buttons are used during feature operation
for interactive display prompt menus. For orientation purposes, the Soft Buttons may be
referred to as the left, center and right Soft Buttons.
The following is an example of the LCD display at an idle Executive Key Telephone. The
Soft Buttons are immediately below the bottom line of the display oriented at left, center
and right positions.
Chapt er 3 - Key Station Features, Opera tion, and Programming
OCT 1
STATION
Figure 3-1: Soft Buttons
FRI 8:00
201
3-3
Advertisement
Table of Contents
