Ucd Group (Hunt); Station - STARPLUS DHS-L Technical Manual

UCD Gro up (Hunt)
Intercom calls that are transferred, follow the Intercom Selection mode at the
destination station (Voice Announce Hands-Free or Tone Ring).
In screened transfer, if the person that you transferred the call to answers your
intercom call in Voice Announce Hands-Free mode, and does not go off-hook to
connect with you on an intercom channel, the CO line will transfer ring when the
transfer is completed.
With voice mail transfers, if no VM mailbox digits are entered for transfers, no digits
are sent to the VM system.
If VM mailbox digits are entered for transfers to voice mail, the following digits are
sent: XFR prefix, VM mailbox and XFR suffix. The
12-Hour Format.

UCD Group (Hunt)

Station

Description
Up to 24 Hunt Groups may be assigned. Each Hunt Group can contain up to 24 members.
Hunt Group directory numbers are (430-459). Any of the 24 UCD groups may be used for
the Voicemail as long as the VM Group is programmed to match the UCD Group. Only
one VM group may be assigned to each system.
Operation
1. Lift handset.
2. Dial Hunt Group number.
Programming
In programming mode:
1. Press [next] until you reach Station Application.
2. Press [show]. The displays shows:
3. Press [show]. The display shows:
4. Enter group number (01-24).
Chapt er 3 - Key Station Features, Opera tion, and Programming
U CD P ROG R AMM ING
ba ck n ext c h g
U CD G ROU P : _ __
bks p s ho w c h g
DHS-L Hour Mode Selection is in the
Selec t [next] to set up
Voicemail Group ( VM) ...
3-133