Table of Contents
Advertisement
Programming
L I N E APPLICATION
1.
TRUNK ROUTE
Trunk Route
PBX Code
PCS Sending
Hunt Method
Alternate Route
Alter Route
Route Number
Delete Digits
Inserted Digits
DIR # SWAP 9
Swap With
2.
T1 CARD
Parameter Set
Framing Type
Encode
Signal
DID Length
Dial Tone
Remote Station
Leading Number
Route Number
º Delete Digits
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-7: Line Application Programming Table
Range
01-24
0-9
Y/N
SEQL/ RAN/SEQF
1/2
01-24
0--9
-
-
D4/ESF
AMI/B8ZS/ None
DTMF/Pulse
3-10
Y/N
1-9
0-24
0--9
Default
System allows 24 different trunk groups.
-
Select a trunk group number.
9
Trunks programmed as PBX type, the PBX cod e
is not subject to Toll Restric tion.
Y
The periodic Clearing Signal (PCS) allows the
calling party to hang-up and immediately
terminate the CO call.
SEQL
Determines ord er that trunks are selected.
SEQF=lst trunk in group
SEQL=sequential from last trunk
RAN=random from last trunk used
-
2 alternate routes are used when all trunk
routes are busy.
-
Enter route number used as alternate.
0
Up to 16 digits may be deleted from d ial string.
(May be used to access long distance
providers.)
-
Up to 16 digits may be inserted from dial
string. (May be used to access long distance
providers.)
This option reassigns the directory number for
the trunk route.
-
Not programmable as this time.
System allows 24 T1 lines.
D4
AMI
DTMF
3
Y
-
0
0
Description
3-23
Advertisement
Table of Contents
