Table of Contents
Advertisement
3-4
Chapter 3 - Key Station Features, Operation, and Programming
Soft Button Prompts
bksp: When the new programming data entry is not desired, the station user may press
the backspace [bksp] button to erase the last data entered and return to the immediately
preceding prompt.
save: When the new data is entered, the system will check the entered data
automatically. If the entry is invalid, the prompt will be refreshed. The station user must
press the store [save] button to confirm entry and continue with the next prompt item.
chg: Press the change [chg] button to modify the current prompted item. If the data/
message to be changed is generated by the system itself, the current programming item
will be replaced by new data (toggled between YES and NO, or cycled through several
data/messages) when the user presses the [chg] button.
next: Repeated depressions of the [next] button will present the next selection or the
next programmable item within the current category.
back: Repeated depressions of the [back] button operate similarly to the [next] button
where the previous programming category is selected, or the previous programming
item within the current category is selected.
show: Press the display [show] button to enter into detailed item feature programming
of a specific category, or to display current programmed content of the feature.
clear: The [clear] button can be used at anytime in system programming. Depressing this
button aborts any programming in progress and returns the Executive Key Telephone to
an idle state.
Programming
Using a PC
The
DHS-L
external, PC-based, DOS software programming tool. The DOS software tool streamlines
programming and allows for database printout and reserve storage. Operation of the PC
Programming software is not covered in this text. Those unfamiliar with PC operation and
the DOS environment should rely on the following (all encompassing) built-in Database
Administration facility.
Programming Tip
The moment the [chg] button is pressed and the value displayed, that operation becomes
functional (this is true for any database field where the [chg] button selects from the
available data field values).
In other areas of programming where data is entered fromthe dial pad, the [save] Soft
Button must be pressed to save that entered data.
software allows the service technician to program the
Programmi ng
DHS-L
system using an
Advertisement
Table of Contents
