Speed Dialing (Abbr) - STARPLUS DHS-L Technical Manual

Speed Di aling (ABBR)
2. Dial [5] + [1]. The telephone attempts to access the same CO line used when the
number was saved. If it is busy, another CO line in the same group is accessed and the
number is dialed.
Conditions
The SDN is a maximum of 16 digits.
If the SDN buffer is empty, the display will show NO SAVED NUMBER.
If all CO lines are busy, the display will show ALL CO LINES BSY.

Speed Dialing (ABBR)

Description
Speed Dialing allows you to store frequently dialed numbers. These numbers are
selected for dialing by the appropriate bin number. The feature code and bin number
may be stored on any feature button for instant, one-button operation.
Each station may store 50 personal (station) speed numbers in memory (bins 500-549)
consisting of up to 16 digits each. There are also 100 Speed Dial bins allocated for
system-wide use (bins 600-699).
System Speed Dial is programmed in System Programming.
Maximum speed dial bins = 1000
Operation
E
NHANCE D
To store a telephone number in a personal Speed Dial bin:
1. Press [FEAT ].
2. Dial [1].
3. Dial the bin number in which to store the telephone number.
4. Dial the telephone number.
5. Press [HOLD]. You will hear confirmation tone.
Save Dialed Number feature code may be stored on any feature button.
By default, stations are not assigned speed bin numbers.
T --
EL EPHONE S
Speed bins may be chained.Pauses and Flashes may be stored in Speed Dial. Chaining
Pauses and Flashes each occupy one character position:Pause = [FEAT] + [7] + [0] = P;Flash
= [FEAT] + [3]
Chapt er 3 - Key Station Features, Opera tion, and Programming
3-119