Using A Keyset - STARPLUS DHS-L Technical Manual

Programming

Using a Keyset

Three LCD interactive soft buttons are instrumental in the database programming
process. Programming must be performed at an Executive model key telephone.
Operation
To make changes in the customer database, you must enter Database Programming from
an idle Executive (display model) Key Telephone. (Any Executive Key Telephone
connected to any station port will serve as the programming entry terminal).
To enter the programming mode:
1. From an idle station, press the [FEAT ] button. The display changes as seen below:
2. Dial [#] + [
default password is ######## (8 #s).
3. When the center Soft Button [next] is pressed, the next sequential programming
category is displayed.
-or-
If the left Soft Button [back] is pressed, the last programming category is displayed.
Chapt er 3 - Key Station Features, Opera tion, and Programming
] on the keypad. The display prompts for the database password. The
✳
D B P SW D : __
bks p sh o w
1. STAT ION
bac k n e xt
10 . D IA GN OST ICS
bac k n e xt
F
c h g
sh o w
sh o w
3-5