Dtk Contents; System Utilities And Supporting Files - Dell External OEMR 2850 User Manual

The directory Z:\Dell\Toolkit\Systems is created as a placeholder that can be
used for all system information that is captured using sample scripts and tools
(for example, the system specific basic input/output system (BIOS) and
baseboard management controller (BMC) configuration files used by the
DTK utilities for configuring a system).
See "Setting Up a Directory Structure for Deployment" for further discussion
of the deployment directory structure.

DTK Contents

The DTK contains Windows PE-based utilities, sample scripts, sample
configuration files, drivers, and documentation for automating the deployment of
Dell systems. The following sections provide a complete list of the DTK contents
and a short description of each component. For a more complete explanation of
the DTK utilities, see the Command Line Interface Reference Guide. For an
explanation of the sample configuration files and scripts, see "Editing the Sample
Batch Files to Perform a Complete System Deployment in Windows PE."

System Utilities and Supporting Files

Table 3-1 describes the files, located in Z:\Dell\Toolkit\Tools. These are the
core tools (utilities) that perform pre-operating system configuration and
deployment tasks. See the Command Line Interface Reference Guide for
complete information about the capabilities of each DTK utility.
Table 3-1. System Utilities and Supporting Files
Toolkit Components
config.ini
mr2kserv.exe
pci.ids
RAC 4
RAC 5
36
Preparing the Directory Structure for Deployment in Microsoft Windows PE
Purpose
Configuration file used by RAIDCFG.EXE.
NOTE:
Do not edit this file. Incorrect edits might cause
RAIDCFG.EXE to fail.
Service that needs to be running for RAIDCFG.EXE to
function.
Used with SYSCFG.EXE to report PCI devices.
Configures Dell Remote Access Controller (DRAC) 4/P
and DRAC 4/I.
Configures DRAC 5/iDRAC.