Dell PowerConnect B-RX Configuration Manual page 56

TABLE 11
Enhancement
ACL-Based Mirroring
ip dns domain-list command
CLI Logging
Syslog Source Interface
UDLD Traps and Syslogs
New Brocade MIB objects
lvi
Summary of enhancements in release 02.4.00 (Continued)
Description
With this release, the Multi-Service IronWare
software supports using an ACL to select traffic for
mirroring from one port to another.
This feature is designed to define a list od domain
names that are used in order to resolve a host.
This feature provides the logging of all valid CLI
commands from each user session into the system
log.
You can configure the BigIron RX to use the
lowest-numbered IP or IPv6 address configured on
a loopback interface, virtual interface, or Ethernet
port as the source for all Syslog packets from the
device.
UDLD state changes will now be logged by default.
The following MIBs have been depreciated by
snAgentCpuUtilTable:
•
snAgGblCpuUtil1SecAvg
•
snAgGblCpuUtil5SecAvg
•
snAgGblCpuUtil1MinAvg
See page
Book: BigIron RX Series
Configuration Guide
Chapter:"Access Control
List"
Section: "ACL-based
inbound mirroring"
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring IP"
Section: "Defining a DNS
entry"
Book: BigIron RX Series
Configuration Guide
Chapter: "Using Syslog"
Section:"Logging all CLI
commands to Syslog"
Book: BigIron RX Series
Configuration Guide
Chapter: "Configuring IP"
Section:"Configuring an
interface as the source for
Syslog packets"
Book: MIB Reference
Chapter: Traps and Objects
to Enable Traps
Section: UDLD Traps
Book: MIB Reference
Chapter: Monitoring and
Logging
Section: Usage Notes on
CPU Utilization and System
CPU Utility Table
BigIron RX Series Configuration Guide
53-1001986-01