Table of Contents
Advertisement
How to View Captured Test Results
Viewing Generated and Captured Data
How to View Captured Test Results
Captured data as well as errors can be visually checked in the Error State
Display.
How to Start the Error State Display
To open the Error State Display:
1 Click the Error State Display icon of the tool bar.
Alternatively, you can also open the View menu and choose Result
Displays.
The Error State Display identifies the DUT output port and shows the
memory contents of the analyzer channels.
How to Operate the Error State Display
The Error State Display has three display modes. It can show:
• Captured Data: Shows what has been captured.
• Compared Data: Shows captured data where errors are highlighted.
• Error Data: Shows errors only.
Figure 100
Error State Display in Capture Mode
The window has two active areas with context menus—the address
column and the data display box.
189
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
Advertisement
Table of Contents
