Copying Memory/Call Contents - Icom IC-92A Instruction Manual

■ Copying memory/call contents

This function transfers a memory channel's contents to
VFO (or another memory/call channel). This is useful when
searching for signals around a memory channel frequency
and for recalling the offset frequency, subaudible tone fre-
quency etc.
D Memory/call➪VFO
q Select the memory (call) channel to be copied.
➥ Push [MR] or [CALL] to select memory mode or call
channel mode, then rotate [DIAL] to select the desired
channel.
w Push and hold [S.MW](MR) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• "μ " indicator blinks.
e Rotate [DIAL] to select "VFO."
r Push and hold [S.MW](MR) for 1 sec. to write the selected
channel contents to VFO mode.
• Returns to VFO mode automatically.
[EXAMPLE]: Copying memory channel 11 to VFO.
During memory mode,
rotate [DIAL] to select
memory channel 11 .
Push and hold
B
MR
for 1 sec.
FM FM
145 870 14
S.MW
A
011 011
μ
D Memory/call➪memory/call
q Select the memory (call) channel to be copied.
w Push and hold [S.MW](MR) for 1 sec. to enter select
e Rotate [DIAL] to select the target memory (call) channel.
r Push and hold [S.MW](MR) for 1 sec. again to copy.
FM FM
145 870 870
r
μ 011 011
BANK BANK :---- :----
MNAME: MNAME:
SKIP SKIP :OFF :OFF
MEMORY/CALL CHANNELS
Holding [S.MW](MR) for 2 sec. at the step w, will also
copy the memory contents to VFO. In this case, the steps
e and r are not necessary.
➥ Push [MR] or [CALL] to select memory mode or call
channel mode, then rotate [DIAL] to select the desired
memory channel.
memory write mode.
• 1 short and 1 long beep sound.
• "μ " indicator blinks.
• Do not hold [S.MW](MR) for more than 2 sec. otherwise the
memory contents will be copied to VFO.
Rotate [DIAL] to select
VFO .
Push and hold
FM FM
145 000 14
B
MR
for 1 sec.
μ VFO
S.MW
VFO is selected.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
FM FM
145 870
A
18
PSKIP PSKIP
19
79