A–Troubleshooting
Troubleshooting with a Diagnostic Port (D_Port)
Verifying D_Port Mode with Interactive QConvergeConsole
CLI
To verify D_Port mode in interactive QConvergeConsole CLI:
1.
From the main menu, select the Adapter Information option, and then
select the adapter type (Fibre Channel Adapter).
2.
From the FC Adapter Information menu, select 2 (FC Port Information).
The Adapter Information menu shows the affected port with a status of Loop
Down, Diagnostic Mo.
Figure A-4. D_Port Mode in Interactive QConvergeConsole CLI
Verifying D_Port Mode with Noninteractive
QConvergeConsole CLI
To verify D_Port mode in noninteractive QConvergeConsole CLI, issue the
following command:
quacli -pr fc -g
Figure A-4
shows an example.
106
BK3254601-00 C