Command Variables - Qlogic 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
Command Format
You can combine the commands -o, -s and -x with other options. However, they
must be at the beginning or at the end of the command line. Use these commands
as follows:

-o = Output the results to a file (see
For example:
# qaucli -pr fc -l -o

-s = Silent mode (see
# qaucli -pr fc -i all -s -o output.txt

-x = Outputs the results in XML format (see
on page
# qaucli -pr fc -i all -x -o output.xml
You cannot combine the command -f with any other options:

-f = Input Parameter Options from a Text File (see
Options from a Text File)" on page
# qaucli -pr fc -f command.txt
In addition, the following general rules for commands apply:

Only one command line option per input file is valid.

You can use either the hyphen (-) character or the forward slash (/)
character. For example, both of these commands are valid:
qaucli -pr fc -g
qaucli -pr fc /g
Table 5-2
<hba instance>
<hba wwpn>
<alias>
<target wwnn>
<target wwpn>
5-4
"-s (Silent Mode)" on page
5-37). For example:
defines the command variables.
Table 5-2. Command Variables
Variable
Adapter number
Adapter world wide port
name
Adapter alias
Target world wide node
name
Target world wide port
name
"-o (Output to a File)" on page
5-33). For example:
"-x (Output in XML Format 1)"
5-11). For example:
.
Definition
a
5-28).
"-f (Input Parameter
Format
xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
Symbolic adapter b name
xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
xx-xx-xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxxxx
SN0054667-00 B