3–Multi-boot Agent (MBA) Driver Software
Setting Up MBA in a Client Environment
a.
b.
3.
Use the up arrow and down arrow keys to move to the Boot Protocol menu
item. Then use the right arrow or left arrow key to select the boot protocol of
choice if other boot protocols besides PXE are available. If available, other
boot protocols include Remote Program Load (RPL), iSCSI, and BOOTP.
4.
Use the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT ARROW
keys to move to and change the values for other menu items, as desired.
5.
Press F4 to save your settings.
6.
Press ESC when you are finished.
Select the adapter to configure and press ENTER. The Main Menu
displays.
Select MBA Configuration to display the MBA Configuration menu
(Figure
3-1).
Figure 3-1. MBA Configuration Menu
NOTE
For iSCSI boot-capable LOMs, the boot protocol is set through the
BIOS. See your system documentation for more information.
If you have multiple adapters in your system and you are unsure
which adapter you are configuring, press CTRL+F6, which causes
the port LEDs on the adapter to start blinking.
13
83840-546-00 D