Connecting Network To An Ethernet Switch Module - Dell PowerConnect 5316M User Manual

Core Version: v1.2.10-P1_02
01-Oct-2004 01:01:22 %INIT-I-InitCompleted: Initialization
task is completed
01-Oct-2004 01:01:25 %LINK-I-Down: Vlan 1
01-Oct-2004 01:01:25 %LINK-I-Down: g1
01-Oct-2004 01:01:25 %LINK-I-Down: g2
01-Oct-2004 01:01:25 %LINK-I-Down: g3
01-Oct-2004 01:01:25 %LINK-I-Down: g4
01-Oct-2004 01:01:25 %LINK-I-Down: g5
01-Oct-2004 01:01:25 %LINK-I-Down: g6
01-Oct-2004 01:01:25 %LINK-I-Down: g7
01-Oct-2004 01:01:25 %LINK-I-Down: g8
01-Oct-2004 01:01:25 %LINK-I-Down: g9
01-Oct-2004 01:01:25 %LINK-I-Down: g10
01-Oct-2004 01:01:25 %LINK-W-Down: g11
01-Oct-2004 01:01:25 %LINK-W-Down: g12
01-Oct-2004 01:01:25 %LINK-W-Down: g13
01-Oct-2004 01:01:25 %LINK-W-Down: g14
01-Oct-2004 01:01:26 %LINK-W-Down: g15
01-Oct-2004 01:01:26 %LINK-W-Down: g16
01-Oct-2004 01:03:32 %INIT-I-Startup: Cold Startup
console>
7
If an error is displayed, or the green system LED is flashing, stop the installation process and
contact Dell technical support.

Connecting Network to an Ethernet Switch Module

To connect to an uplink port, use Category 5 unshielded twisted-pair (UTP) cables with RJ-45
connectors at both ends. The RJ-45 ports on the Ethernet Switch Module supports automatic
Media-Dependent Interface/Media-Dependent Interface with internal crossover wiring
36
Installing the Ethernet Switch Module