Tacacs+ Settings - Dell PowerConnect 5316M User Manual

Figure 6-59. TACACS+ Settings
Host IP Address — Specifies the TACACS+ Server IP address.
Priority (0-65535) — Specifies the order in which the TACACS+ servers are used. The default is 0.
Source IP Address — The switch module source IP address used for the TACACS+ session
between the switch module and the TACACS+ server.
Key String (0-128 Characters) — Defines the authentication and encryption key for TACACS+
communications between the switch module and the TACACS+ server. This key must match the
encryption used on the TACACS+ server.
Authentication Port (0-65535) — The port number through which the TACACS+ session occurs.
The default is port 49.
Reply Timeout (1-30) — The amount of time that passes before the connection between the
switch module and the TACACS+ server times out. The field range is 1-30 seconds.
Status — The connection status between the switch module and the TACACS+ server. The
possible field values are:
Connected — There is currently a connection between the switch module and the
TACACS+ server.
Not Connected — There is not currently a connection between the switch module and the
TACACS+ server.
Single Connection — Maintains a single open connection between the switch module and the
TACACS+ server when selected
142
Configuring System Information