Adding Protocol Ports; Vlan Protocol Groups Cli Commands - Dell PowerConnect 5316M User Manual

4
Click Apply Changes.
The protocol group is assigned, and the switch module is updated.
Assigning VLAN Protocol Group Settings
1
Open the Protocol Group page.
2
Complete the fields on the page.
3
Click Apply Changes.
The VLAN protocol group parameters are defined, and the switch module is updated.
Removing Protocols From the Protocol Group Table
1
Open the Protocol Group page.
2
Click Show All.
The Protocol Group Table opens.
3
Select Remove for the protocol groups that need to be removed.
4
Click Apply Changes.
The protocol is removed, and the switch module is updated.
Defining VLAN Protocol Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring Protocol Groups.
Table 7-64. VLAN Protocol Groups CLI Commands
CLI Command
map protocol protocol [encapsulation]
protocols-group group
The following example maps ip-arp protocol to group "213":
console (config)# vlan database
console (config-vlan)# map protocol ip-arp protocols-group 213

Adding Protocol Ports

The Protocol Port Table page adds interfaces to Protocol groups. To open the Protocol Port Table
page, click Switch→ VLAN→ Protocol Port in the tree view.
232
Configuring Switch Module Information
Description
Maps a protocol to a protocol group.
Protocol groups are used for protocol-
based VLAN assignment.