Port Configuration Cli Commands; Ports Configuration Table - Dell PowerConnect 5316M User Manual

2
Select a port in the Port Field.
3
Modify the remaining fields.
4
Click Apply Changes.
The port parameters are saved to the switch module.
Displaying the Port Configuration Table:
1
Open the Port Configuration page.
2
Click Show All.
The Ports Configuration Table opens:
Figure 7-84. Ports Configuration Table
Configuring Ports with CLI Commands
The following table summarizes the equivalent CLI commands for configuring ports as displayed
in the Ports Configuration Table page.
Table 7-48. Port Configuration CLI Commands
CLI Command
interface ethernet interface
Description
Enters the interface configuration
mode to configure an ethernet type
interface.
Configuring Switch Module Information
185