Remote Log Server Settings - Dell PowerConnect 5316M User Manual

Figure 6-30. Remote Log Server Settings
Available Servers — Contains a list of servers to which logs can be sent.
UDP Port (1-65535) — The UDP port to which the logs are sent for the selected server. The
possible range is 1 - 65535. The default value is 514.
Facility — Defines a user-defined application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned, the first
facility level is overridden. All applications defined for a switch module utilize the same facility on
a server. The possible field values are:
Local 0 - Local 7.
If unspecified, the default is local7.
Description (0-64 Characters) — The user-defined server description.
Delete Server — Deletes the currently selected server from the Available Servers list, when
selected.
The Remote Log Server Settings page also contains a severity list. The severity definitions are the
same as the severity definitions in the Global Log Parameters page.
Sending Logs to a Server:
1
Open the Remote Log Server Settings page.
2
Select a server from the Available Servers drop-down list.
Configuring System Information
99