Igmp Port/Lag Members Table Control Settings; Bridge Multicast Group - Dell PowerConnect 5316M User Manual

Figure 7-106. Bridge Multicast Group
VLAN ID — Identifies a VLAN and contains information about the Multicast group address.
Bridge Multicast Address — Identifies the Multicast group MAC address/IP address.
Remove — When selected, removes a Bridge Multicast address.
Ports — Port that can be added to a Multicast service.
LAGs — LAGs that can be added to a Multicast service.
The following table contains the IGMP port and LAG members management settings:
Table 7-70. IGMP Port/LAG Members Table Control Settings
Port Control Definition
D The port/LAG has joined the Multicast group
dynamically in the Current Row.
S Attaches the port to the Multicast group as
static member in the Static Row.
The port/LAG has joined the Multicast group
statically in the Current Row.
F Forbidden.
Blank The port is not attached to a Multicast group.
Adding Bridge Multicast Addresses
1
Open the Bridge Multicast Group page.
Configuring Switch Module Information
245