Gvrp Global Parameters Cli Commands - Dell PowerConnect 5316M User Manual

GVRP Global Status — Enables or disables GVRP on the switch module. GVRP is disabled by
default.
Interface — The port or LAG for which GVRP is enabled.
GVRP State — Enables or disables GVRP on an interface.
Dynamic VLAN Creation — Enables or disables VLAN creation through GVRP.
GVRP Registration — Enables or disables VLAN registration through GVRP.
Enabling GVRP on the Switch Module
1
Open the GVRP Global Parameters page.
2
Select Enable in the GVRP Global Status field.
3
Click Apply Changes.
GVRP is enabled on the switch module.
Enabling VLAN Registration Through GVRP
1
Open the GVRP Global Parameters page.
2
Select Enable in the GVRP Global Status field for the desired interface.
3
Select Enable in the GVRP Registration field.
4
Click Apply Changes.
GVRP VLAN Registration is enabled on the port, and the switch module is updated.
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed
in the GVRP Global Parameters page.
Table 7-66. GVRP Global Parameters CLI Commands
CLI Command
gvrp enable (global)
gvrp enable (interface)
gvrp vlan-creation-forbid
gvrp registration-forbid
show gvrp configuration [ethernet
interface| port-channel port-channel-
number]
Description
Enables GVRP globally.
Enables GVRP on an interface.
Enables or disables dynamic VLAN
creation.
De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on
the port.
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP .
Configuring Switch Module Information
235