Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Select Authentication page.
Table 6-33. Select Authentication CLI Commands
CLI Command
enable authentication
[default | list-name]
login authentication
[default | list-name]
ip http authentication
method1 [method2.]
ip https authentication
method1 [method2.]
show authentication
methods
Description
Specifies the authentication method list when
accessing a higher privilege level from a remote
Telnet, Console or SSH.
Specifies the login authentication method list for
a remote Telnet, Console or SSH.
Specifies authentication methods for HTTP
servers.
Specifies authentication methods for HTTPS
servers.
Displays information about the authentication
methods.
Configuring System Information
133