Defining Stp Lag Settings - Dell PowerConnect 5316M User Manual

console(config)# interface ethernet g15
console(config-if)# spanning-tree disable
console(config-if)# spanning-tree cost 35000
console(config-if)# spanning-tree port-priority 96
console(config-if)# end
console# show spanning-tree ethernet g15
Port g15 disabled
State: disabled
Port id: 96.5
Type: P2p (configured: Auto)
Designated bridge Priority : 32768
Designated port id: 96.5
Number of transitions to forwarding state: 0
BPDU: sent 0, received 0

Defining STP LAG Settings

The STP LAG Settings page contains fields for assigning STP aggregating port parameters. To
open the STP LAG Settings page, click Switch→ Spanning Tree→ LAG Settings in the tree view.
214
Configuring Switch Module Information
Role: disabled
Port cost: 35000
Port Fast: No (configured: No)
STP
Address: 00:e8:00:b4:c0:00
Designated path cost: 19