Table of Contents
Advertisement
Figure 9-126. Interface Settings
Interface — The specific port or LAG to configure.
Disable "Trust" Mode on Interface — Disables Trust mode on the specified interface. This setting
overrides the Trust mode configured on the Ethernet Switch Module globally.
Set Default CoS For Incoming Traffic To — Sets the default CoS tag value for untagged packets.
The CoS tag values are 0-7. The default value is 0.
Assigning QoS settings for an interface:
1
Open the Interface Settings page.
2
Select an interface in the Interface field.
3
Define the fields.
4
Click Apply Changes.
The CoS settings are assigned to the interface.
Displaying QoS/CoS settings:
1
Open the Interface Settings page.
2
Click Show All.
The Interface Table is displayed.
Configuring Quality of Service
293
Advertisement
Chapters
Table of Contents
