Vlan Port Settings - Dell PowerConnect 5316M User Manual

Figure 7-98. VLAN Port Settings
Port — The port number included in the VLAN.
Port VLAN Mode — The port mode. Possible values are:
General — The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged
(full 802.1Q mode).
Access — The port belongs to a single untagged VLAN. When a port is in Access mode, the
packet types which are accepted on the port cannot be designated. Ingress filtering cannot be
enabled/disabled on an access port.
Trunk — The port belongs to VLANs in which all ports are tagged (except for one port that
can be untagged).
PVID — Assigns a VLAN ID to untagged packets. The possible values are 1-4094. VLAN 4095 is
defined as per standard and industry practice as the Discard VLAN. Packets classified to the
Discard VLAN are dropped.
Frame Type — Packet type accepted on the port. Possible values are:
Admit Tag Only — Only tagged packets are accepted on the port.
Admit All — Both tagged and untagged packets are accepted on the port.
Ingress Filtering — Enables or disables Ingress filtering on the port. Ingress filtering discards
packets that are destined to VLANs of which the specific LAG is not a member. The field default is
Enable. To disable ingress filtering, enable Multiple Hosts.
Current Reserved VLAN — The VLAN currently designated by the system as the reserved VLAN.
226
Configuring Switch Module Information