Mapping Dscp Values To Queues; Cos To Queue Settings Cli Commands - Dell PowerConnect 5316M User Manual

Table 9-91. CoS to Queue Settings CLI Commands
CLI Command
wrr-queue cos-map queue-id
cos0..cos7
The following is an example of the CLI commands:
console(config)# wrr-queue cos-map 4 7

Mapping DSCP Values to Queues

The DSCP to Queue Mapping page provides fields for defining egress queue to specific DSCP
fields. To open the DSCP to Queue Mapping page, click Quality of Service→ QoS Global
Parameters→ DSCP to Queue in the tree view.
NOTE:
For the list of the DSCP default queue settings, see "DSCP to Queue Mapping Table Default
Values" on page 290.
Figure 9-129. DSCP to Queue Mapping
DSCP In — The values of the DSCP field within the incoming packet.
Description
Maps assigned CoS values to the egress
queues.
Configuring Quality of Service
299